Remote Battery Switches ML-Remote Battery Switches

ML-RBS Remote Battery Switch with Manual Control - 24V DC 500A

7702
500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations
  • Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
  • LED output to remotely indicate switch state - requires optional LED
  • 3∕ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
  • 7∕ 8" (22 mm) stud length accepts multiple cable terminals
  • Label recesses for circuit identification
  • Silver alloy contacts provide high reliability for switching live loads
Where to Buy Find a TECH Installer Compare
Specifications
Control Circuit Voltage18-32V DC
Control Circuit Connection Tinned Wire
Nominal Voltage24V DC
Manual Control Yes
Coil Function Bi-Stable
Mounting#10
Amperage Operating Current0mA
Amperage Operating Current when changing state<4A (40 ms)
Terminal Stud Torque140 in-lb (15.82 Nm)
Continuous Rating 500A
Intermittent Rating 700A (5 min)
Starting Rating 30 sec 1000A DC
Minimum Operating Temperature-10° C
Maximum Operating Temperature60° C
Cable Size to Meet Ratings2x (4/0)
Live Current Switching300A @ 12V DC
Master Control Switch CapabilityNo
Mechanical Endurance100,000 Cycles
Switching Rating25A
Terminal Ring Diameter Clearance1.18in (29.97 mm)
Terminal Stud Length0.875in (22.23 mm)
Terminal Stud Size3/8" - 16 (M10)
Weight2.09lb (0.95 kg)
Included
QtyPNProduct
1 2145 SPDT Remote Control Contura Switch - (ON)-OFF-(ON)
Optional Accessories
1147 Remote Control Panel
1148 Remote Control Panel
9160 ML Series Link Bus
Meets the following Regulatory Specifications
ABYC C-7
CE Marked
Ignition Protected
IP66
ISO 8846
SAE J1171
Remote Battery Management and ACR SubSystem

Remote Battery Management and ACR SubSystem


The ML-ACR (Automatic Charging Relay) and ML-RBS (Remote Battery Switch), when paired, offer complete battery management of large battery banks with the push of a button. In addition to automatically sharing the charge from an engine’s alternator between the start and auxiliary battery, the ML-ACR control switch provides momentary battery combining to assist with starting in the event of a low engine battery. Multiple remote battery switches can be easily connected to the ML-ACR with the optional Paralleling Link Bus for a complete remote battery management Subsystem.

NoticeYou have cookies disabled. — Bluesea.com requires cookies to provide you full functionality. Many features of the site will not function until cookies are enabled. — Read Privacy Policy
NoticeYou are using an outdated browser. — Bluesea.com can not guarantee 100% compatability with your browser — Upgrade your browser