IP (Ingress Protection) Ratings




Can't find what you need?

Call 800.222.7617 to reach customer service Monday through Friday, 8am to 5pm Pacific Time.

Or email us techsupport@bluesea.com

You may have noticed that some enclosed electrical components have an IP rating-for example, "IP67". Sometimes, a brief explanation of the rating is provided-for example, "IP67, Temporary Immersion". This technical brief provides an explanation of the IP rating system.

(Don't confuse IP rating with the IP designation indicating that a device, such as a switch or circuit breaker, is ignition protected.)

IP stands for Ingress Protection and indicates the degree of protection provided by an enclosure. The numbers following IP represent levels of sealing and can range from none at all (IP00) to protection against dust and continuous immersion in water (IP68). The table provides a description of the protection at each level.

IP Rating Chart
Download PDF

For example, consider an IP65 rating:

  • The rating's first digit, e.g. IP6_, means that the enclosure is dust tight
  • The second digit, e.g IP_5, relates to the ingress protection against water

Solids ingress protection Levels 5 and 6 are concerned with dust protection. Level 5 allows some dust to enter, but not enough to affect equipment operation. Level 6 is fully dust-tight. These tests are conducted in a dust chamber using fine talcum powder recirculated by a blower. Depending on the test requirements, a partial vacuum may be drawn through the enclosure. The vacuum tests are performed for a period of between two and eight hours, depending on how much air volume is drawn through the cabinet. The duration of the non-vacuum tests is eight hours.

IP water resistance varies from mild drip resistance, through sprays, jets, and total immersion. For spray Levels 3 and 4, the water is delivered by either an oscillating tube which looks like a garden sprinkler, or manually, by a handheld showerhead. The spray head passes 12.5 liters per minute. The enclosure being tested is exposed for at least three minutes, or in the case of a large unit, at least one minute for each square meter of surface as the spray head is slowly moved around.

For Levels 5 and 6, hose nozzles are used. The Level 5 exposure is at 12.5 liters/minute through a 6.3 mm (1/4 inch) nozzle. Level 6 is a higher pressure and flow test, using a 12.5 mm (1/2 inch) nozzle at a flow rate of 100 liters/minute. For both Levels 5 and 6, the hosing is conducted from a distance of 2.5 to 3 meters. Exposure time is three minutes.

For Levels 7 and 8 the enclosure is submerged in water. Level 7 tests water submersion for 30 minutes. The enclosure is dunked so that its bottom is 1 meter below the water surface, and its top is 0.15 meters below the surface. Level 8 is a special test where the performance level-in terms of duration and external water pressure (which is proportional to depth)-are agreed on by the vendor and the user.

The IP rating system was established by the International Electromechanical Commission (IEC), a worldwide organization for standardization. The object of the IEC is to promote International cooperation on all questions concerning standardization in the electrical and electronic fields. The IEC collaborates closely with the International Organization for Standards (ISO). IEC documents have the form of recommendations and are published in the form of standards, technical specifications, technical reports or guidelines.

A complete description of the IP ratings and associated tests is found in IEC Publication 529. Although these ratings were initially developed as a way to classify enclosures, they now provide engineers with a convenient, practical way to compare levels of sealing. This standard describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. The adoption of this classification system promotes uniformity in methods of describing the protection provided by the enclosure and in the tests to prove the various degrees of protection.

Look for a product's IP rating when making a purchase. The product's IP rating is your way of knowing that the product is protected from particles or dust or water that may be present in the environment where you install the product.

NoticeYou have cookies disabled. — Bluesea.com requires cookies to provide you full functionality. Many features of the site will not function until cookies are enabled. — Read Privacy Policy
NoticeYou are using an outdated browser. — Bluesea.com can not guarantee 100% compatability with your browser — Upgrade your browser