Solenoids L-Series
L Solenoid - 12/24V DC 250A
9012REV000Discontinued - replaced by PN 9012 The circuit board is now hermetically sealed within the solenoid and is rated IP67 waterproof
- Hermetically sealed contacts / vaporproof
- Ignition protected - safe for installation aboard gasoline powered boats
- Activated by an ON-OFF switch mounted anywhere
- integrated coil control minimizes heating and amperage draw
- 450 Amp Class
- Designed for 12 or 24 Volt systems
- Ignition protected -- safe for installation aboard gasoline-powered boats
- Activated by a low amperage ON-OFF switch mounted anywhere
Dimensioned Drawing
Instructions| Specifications | |
|---|---|
Control Circuit Connection  | 22 AWG Tinned Wire |
| Nominal Voltage | 12V DC 24V DC |
| Coil Function | Normally Open |
| Mounting | #10 |
| Amperage Operating Current continuous | 0.13A @ 12 V 0.07A @ 24 V |
| Input Voltage | 9-36V DC |
| Amperage Operating Current when changing state | 3.8A |
| Terminal Stud | Traditional Nut and Washer |
| Terminal Stud Torque | 80 in-lb (9.04 Nm) |
| Continuous Rating | 250A 300A 400A 450A |
| Intermittent Rating | 275A (5 min) 400A (5 min) 500A (5 min) 600A (5 min) |
| Cranking Rating 10 sec | 500A |
| Contact Form | SPST-NO |
| Inrush Rating: 0.25 sec (10 repeats) | 2000A |
| Switching Cycles | 1,000,000 |
| Terminal Stud Length | 0.625in (15.88 mm) |
| Terminal Stud Size | 5/16" (M8) |
| Weight | 1.00lb (0.45 kg) |
| Weight | 1.00lb (0.45 kg) |
| Meets the following Regulatory Specifications |
|---|
    |
